BIS Certification for Specification for Hot rolled steel strip (bailing) IS 1029:1970
%20(3).jpg)
BIS Certification under IS 1029:1970 is required for manufacturers of hot-rolled steel strip used for bailing and industrial strapping.
The standard defines chemical composition, tensile strength, hardness, and dimensional tolerances for consistent product quality.
Manufacturers must maintain in-house testing labs and comply with BIS inspections and factory audits.
ISI-marked steel strip gains approval for use in OEM supply chains, government procurement, and regulated industrial applications.
Both Indian manufacturers and foreign exporters must obtain BIS approval before selling hot-rolled steel strip in the Indian market.
market-entry time delays.
Introduction
Typically, it is an instance when manufacturers of hot-rolled steel strips intend to deliver their products to the market, but the delivery is delayed because the items lack BIS certification under IS 1029:1970. The event usually unfolds where production is in full swing, customers
are impatiently waiting for their orders, and compliance is taken for granted as mere formality of the paperwork. However, IS 1029:1970 implies more than just a label. It is a recognized technical standard that specifies the requirements for the manufacturing, testing and packaging of steel strip for bailing in India. Knowledge of this standard is instrumental in preventing holding up of shipments, retaining quality at a certain level and ensuring that every portion of steel strip is able to work effectively in very tough packaging and load-securing applications. In case you manufacture locally or re-export your products to India, the engineering and certification requirements are quite similar and making them right from the beginning will save you a lot of operational work.Bureau of Indian Standards
What is IS 1029 : 1970?
IS 1029:1970 is an Indian Standard that specifies the production and testing of the hot-rolled steel strip used for baling in India. It specifies the element composition, physical strength, size,
and surface characteristics of the metal product to make sure that it works as expected in the packaging and load securing sector. The producers are required to comply with these specifications and achieve BIS certification to be able to offer the material that carries the ISI mark to the Indian consumers.ISI MARK
Key Points:
IS 1029:1970 sets specifications for hot-rolled steel strip used for bailing and strapping.
It covers chemical limits, tensile strength, hardness, and dimensional tolerances.
Compliance ensures consistent performance and safety in industrial packaging.
BIS certification is mandatory for manufacturers selling in India.
ISI marking is permitted only after factory inspection and successful product testing.
Why is BIS Certification Mandatory
BIS certification is a must for hot-rolled steel strip according to IS 1029:1970. The reason is that the material is heavily used in the high-stress bailing and strapping operations, and if it fails, accidents, product loss, and downtime of the operations are inevitable. The mandate is there to guarantee the same quality, safety, and trustworthiness of the product from all the manufacturers and importers that supply the Indian market.
Key Points:
The hot-rolled steel strip for bailing is a safety-critical material that is used under high tension.
BIS certification is a way of ensuring that the market is not supplied with weak, inconsistent, or unsafe steel.
If industries adhere to the rules, they are safe from accidents and the risk of load failure.
ISI mark is a quality assurance to the buyers that the strip conforms to the national standards.
Importance and Benefits of BIS Certification
Step-by-Step Process of BIS Certification
Step 1: Documentation
The manufacturer collects all documents related to the factory, products, and quality control.
BIS requires a photoshoot of the manufacturing unit along with a report of the in-house testing.
Proper documentation means that the file will not be held up during the verification process.
Step 2: Product Testing
Testing samples are taken to a BIS-approved laboratory for testing as per IS 1029:1970.
Usually, the tests include chemical composition, tensile strength, hardness, and dimensions.
BIS application can only be accompanied by test reports with all results meeting the standards.
Step 3: Application Submission
Test report and other necessary documents are uploaded on the BIS portal.
Application, testing, and marking charges are paid through the net banking facility.
The time taken for approval is short when the application is thorough and without errors.
Step 4: Scrutiny and Inspection
BIS officers check the documents for correctness and compliance.
A visit to the factory is made to assess the production capacity and authenticate the testing labs.
BIS may decide to take additional samples for another laboratory during the inspection.
Step 5: Grant of License
After successful verification, BIS issues the license to use the ISI mark.
The manufacturer receives a unique CM/L number for marking on every batch.
Regular surveillance audits ensure continuous compliance with IS 1029:1970.
Documents Required for BIS Certification
Timelines, Costs, Validity & Renewal
Timelines: Usually from 20 to 30 days, with only 7-15 days for the testing.
Costs: The cost of the government and the test varies depending on the product. There can be some additional charges though.
Validity: The validity period is 2 years in most situations.
Renewal: The renewal is done before the expiration; there should be updated documents/tests; the renewal
Why Choose Diligence Certifications
Expert team with strong BIS and regulatory knowledge
Fast, streamlined processing to reduce approval delays
Accurate documentation and testing coordination
Transparent guidance with clear communication
High success rate and complete end-to-end support
Conclusion
An explicit and compliant method of obtaining BIS certification under IS 1029:1970 enables producers and traders to keep away from shipment delays, rejections, and quality inconsistencies of their products. If the hot-rolled steel strip is the material used for bailing, a minute change in the strength or thickness may impact the safety of the load, which is the reason why the certification is of real operational value beyond being just a regulatory formality. Companies, by adhering to the prescribed method, having good records, and ensuring that their testing laboratories are up to the BIS standards, can obtain a stable position in the market and win the confidence of large buyers. It is a must for anyone willing to supply hot-rolled steel strip in India to be able to meet the standard IS 1029:1970 and have a valid BIS licence if they want to be considered reliable, credible, and have their business run smoothly.
Comments
Post a Comment